THE'
Chemical anchor Fischer FIS C 700 HP Pro.1, in coaxial format of 410 ml, with hybrid bi-component injection.
Resin and hardener are in two separate containers and are not mixed or activated until extrusion takes place through the mixer.
- Before installing the cleaning of the hole according to the indications shown.
- Extrude the resin starting from the bottom of the hole, being careful not to leave without air bubbles.
- Enter the bar manually by rotating it until the base of the hole is reached.
- The resin adheres to the entire surface of the anchoring bar and the surface of the hole, sealing it.
- The two cartridges are easy and quick to use with the Fischer guns.
- The partially used cartridges can be reused simply by replacing the mixer.
FIS C 700 HP Pro.1 is certified for applications on walls made with full brick or semi -alter in brick or calcium silicate. It is a perfect chemical anchor also for construction applications in cable or lightened concrete blocks or cleated concrete and not crackled from class C20/25 to C50/60. FIS C 700 HP Pro.1 is certified for the use of adherence bars with a diameter from 10 to 20 mm for fixing metal buildings, in wood, for facades, stairs, curtains, roofs and many other applications of daily use.
Its performances have been tested by the Eota, the European organization for technical approval, which has certified a useful life of the minimum product of 50 years, during it keeps its technical characteristics unaltered.
Compared to most of the resins on the market, FIS C 700 HP Pro.1 boasts a huge flexibility in building applications, with the possibility of being used without resistance losses, from -40 ° C to 120 ° C with performance then certified both at high and low temperatures.
Instructions for use
- FIS C700 HP Pro.1 and T-Bond Pro.1 are chemical anchors with hybrid bi-component injection.
- Resin and hardener are in two separate containers and are not mixed or activated until extrusion takes place through the mixer.
- Before installing the cleaning of the hole according to the indications shown.
- Extrude the resin starting from the bottom of the hole, being careful not to leave without air bubbles.
- Enter the bar manually by rotating it until the base of the hole is reached.
- The resin adheres to the entire surface of the anchoring bar and the surface of the hole, sealing it.
- The two cartridges are easy and quick to use with the Fischer guns.
- The partially used cartridges can be reused simply by replacing the mixer.
Technical data
- 15 months storage
- Content 410 ml
- 180 scale unit
